English GB 
Polski
Deutsch
The D1080 is a self-service machine that automatically dispenses up to 1080 different products. Based on the rotary drum principle, it allows you to store a large number of products in a small space. A touch screen provides the user with intuitive and intelligent machine management and, thanks to the patented compartment scanning system, product loading is quick and easy. For the D1080, it is possible to connect a barcode reader and an auxiliary machine without a user panel.
Product compartment adjustment function and 3 product loading options
The machine’s impressive load capacity is achieved by adjusting the compartments in width and height in 9 configurations. The compartments can be of different sizes. The easy change of settings allows you to adjust the capacity of the machine to the current needs
In the first option, the loading takes place through an open-ended door. This is ideal if you need to replenish large quantities of the same type of product.
The second option is recommended for products of various types, loaded through a flap in the door of the vending machine.
The third option is an innovative scanning drum system which automatically detects where products have been loaded into the machine and significantly reduces loading times.
Key differences between Pro and Basic
* functionality integrated into the scanning system
Vending machine can be offered together with
Dedicated lock with one universal key
The pin lock of the renowned Baton company ensures the opening of multiple machines with a single key, effectively protecting against opening with a universal key. The lock is made of high quality steel.
Barcode reader
The barcode reader allows even the most damaged codes to be identified thanks to the reading improvement software. It is a high quality, multi-line (18 scanned lines) laser scanner designed to work in a vertical position. It is designed for built-in use. It is ideal for identifying products being loaded and those taken from vending machines.
Protective pipes
The protective tubes form a barrier to protect the sides of the vending machines from being hit by trolleys and other vehicles in the warehouse halls. The robust steel construction provides effective protection. The tubes are fixed to the sides of vending machines with the use of screws in the technological pre-drilled holes. The construction is powder-coated in bright colors or otherwise according to individual needs.
Boxes
Boxes for small products for vending machines D1080 and D810 are available in three widths. Ideal for small products such as screws, nuts, etc. The boxes prevent them falling out when the drum is rotating and make them easier to remove from the machine.
Rubber pad to protect products from scratching for vending machines
The pad is flexible and therefore protects the product from damage during product taking and especially during tool return and loading. The soft padding allows you to place products in the machine without fear of scratching them and, thanks to the cut-outs in the sponge, the pad adheres perfectly to the surface.
230V internal installation
Internal installation available for the L40ME vending machine. Thanks to the special construction of the rear of the vending machine, we have the possibility to install boxes with 3 modules depending on the needs.
Drum Scanning System
The drum scanning feature can reduce loading times by up to 50%. It is available for the D540 and D810. It is possible to install the system in an existing machine.
Router and GSM modem
Wherever a wired LAN network cannot be easily installed, the machine can be connected to the local network via Wi-Fi.
Warranty extension
An extensive warranty extension offer allows for the extension of the protection for up to 6 years (for the parts only). The all-inclusive protection variant covers the repair of vending machines by authorized service technicians with a guaranteed response time of up to 24 hours.
Technical specification
| Technical specification | |||||||
| Height [mm] | 1950 | ||||||
| Width [mm] | 1095 | ||||||
| Depth [mm] | 1095 | ||||||
| CAPACITY [COMPARTMENTS/SHELVES OF ONE TYPE] | |||||||
| 240 × 160 mm | 120 | ||||||
| 160 × 160 mm | 180 | ||||||
| 240 × 80 mm | 240 | ||||||
| 240 × 53 mm or 160 × 80 mm or 80 × 160 mm | 360 | ||||||
| 160 × 53 mm | 540 | ||||||
| 80 × 80 mm | 720 | ||||||
| 53 × 80 mm | 1080 | ||||||
| OTHER | |||||||
| Operating temperature [°C] | 5 - 40 | ||||||
| Weight [kg] | 750 | ||||||
| Current consumption [Watts] | standby: 15 / distribution: 100 | ||||||
| Voltage [V] | 230 / 1 A | ||||||
| Permissive load [kg] | 185 | ||||||
| DIMENSIONS IN MM | NUMBER OF COMPARTMENTS | A | B | C | D | ||
 |
1080 | 80 | 53 | 437 | 7 | ||
| 720 | 80 | 80 | 437 | 11 | |||
| 360 | 80 | 160 | 437 | 23 | |||
| 540 | 170 | 53 | 437 | 7 | |||
| 360 | 170 | 80 | 437 | 11 | |||
| 180 | 170 | 160 | 437 | 23 | |||
| 360 | 260 | 53 | 437 | 7 | |||
| 240 | 260 | 80 | 437 | 11 | |||
| 120 | 260 | 160 | 437 | 23 | |||
